Log in to use our free company, program and sector update tracker feature.

Front page

High temperature resistant, toughened structural adhesive cures at room temperature

Formulated for structural applications in extreme environments with temperatures from -80°F to +425°F, Master Bond Supreme 33 has superior resistance to thermal cycling, thermal shock and impact. This toughened, two-component epoxy offers high structural bond strength to a wide variety of substrates including metals, glass, ceramics, wood, vulcanized rubbers and many plastics. Supreme 33 also resists chemicals including water, oil and many organic solvents.

Supreme 33 has a mix ratio of 100 to 70 by weight or 1 to 1 by volume. It cures conveniently at room temperature in 48 to 72 hours. For optimal performance, the suggested schedule is curing overnight at room temperature followed by 2 to 3 hours at 150 to 200°F. This 100% reactive epoxy does not contain any solvents or diluents, has exceptional dimensional stability and features very low shrinkage upon cure.

It produces high performance bonds boasting a shear strength over 2,500 psi, a tensile shear strength greater than 7,500 psi and a T-peel strength exceeding 15 pli. With a volume resistivity of 1014 ohm-cm, a dielectric strength over 400 volts/mil, and a dielectric constant of 3.8 at 75°F, Supreme 33 is an outstanding electrical insulator that is widely used in the electronic, electrical, aerospace and OEM industries. Supreme 33 is also available in a non-drip version called Supreme 33ND.

Press release issued by Master Bond Inc. on January 18, 2011


 Contact details from our directory:
Master Bond Inc. Electronic Circuitry Conformal Coatings, Adhesives, Conductive Adhesive, Epoxy Adhesive, Fire Resistant Adhesive, Glass-to-Metal Adhesive, Metal-to-Metal Adhesive, Optical Adhesive, Pressure-Sensitive Adhesive, Rubber Adhesive, Silicone Adhesive, Potting Compounds, Thread Locking Compounds, Fuel Tank Sealants, Coatings, Chemical Agent Resistant Coatings


 Related directory sectors:

Enhanced listings:

Victrex Plc
New VICTREX® AE250 composites and hybrid molding technology are changing the equation in Aerospace composites – find out more!

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.