Log in to use our free company, program and sector update tracker feature.

Front page

Safe alternative to conventional paint strippers

Developed as a safe alternative to Methylene Chloride, Sodium Hydroxide and other hazardous and/or traditional paint stripping methods, D-Zolve GL 15-33 from Solvent Kleene, Inc. is designed to remove several layers of paint from aircraft where clinging to horizontal and vertical surfaces is essential.

D-Zolve GL 15-33 dissolves the bond between paint and the surface, facilitating the removal of difficult to strip paints and coatings including epoxy primers with cross linked polyurethane top coats and powder coatings such as polyesters, epoxies, and polyurethanes. Once the surface bond is broken, both the paint and D-Zolve are easily removed with a high pressure water rinse. Because of  D-Zolve GL 15-33's excellent clinging properties, there is very little loss from roll off. Additionally, it is slow to evaporate so it is able to keep the painted surface moist for several hours, requiring little or no reapplication.

D-Zolve GL 15-33 meets Boeing D6-17487D and Air Force T.O. 1-1-8. With no chlorinated components or other carcinogens, D-Zolve GL 15-33 offers minimal or no air pollution potential and no hydrogen embrittlement. It is non-flammable and not subject to any DOT restrictions or special labeling. D-Zolve GL 15-33 works at room temperature or can be heated. It is designed to be applied with a spray gun or brush and is also available for in-tank parts immersion stripping.

Press release issued by Solvent-Kleene, Inc. on August 24, 2006


 Contact details from our directory:
Solvent-Kleene, Inc. Coating Removal Equipment


 Related directory sectors:

Enhanced listings:

Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

General Plastics Manufacturing Co.
General Plastics has been supplying OEMs, Tier 1 and Tier 2 companies with flame-retardant foam core materials and custom flexible foam molded parts for aircraft flight decks and interior cabins for over 50 years.

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.