Log in to use our free company, program and sector update tracker feature.
 

Front page

CeeLok FAS-T connector system

Pioneering CeeLok FAS-T connector system features field terminable, crimp-snap, 10GB ethernet technology

TE Connectivity's new CeeLok FAS-T connector system is the most rugged, small form factor, 10 Gigabit ETHERNET, field terminable I/O connector in the Aerospace, Defense and Marine marketplace. The CeeLok FAS-T connector easily meets today's high speed signal requirements and the expected 10 Gb/s speeds needed in the future. This exciting new connector features crimp-snap contacts that enable easy termination and field repairability. Additionally its unique, integral backshell with 360-degree shielding our single-piece design drives down weight and cost, while significantly improving overall system performance.

"The CeeLok FAS-T connector provides an easy to terminate, high-speed/bandwidth interface that delivers on the demand of Size Weight and Power (SWaP) reduction, without compromising upon ever-increasing performance needs," said Earle Olson, business development manager, Global Aerospace, Defense & Marine, TE Connectivity. "This new small format, field terminable connector empowers a wide cross-section of industry applications from in-flight applications for both commercial and military platforms, as well as ground-based and marine-based needs."

The connector's small form factor (Shell Size 8 – 0.750") utilizes a panel cutout of .698" (diameter) while maintaining outstanding signal integrity thanks to the patented T-shaped pin pattern that provides noise cancellation and decoupling to minimize cross talk. Additionally, the CeeLok FAS-T connector has been designed to easily survive harsh environments in military, commercial aerospace and marine/offshore applications.

The CeeLok FAS-T connector is a true 100 Ohm impedance connector that is compatible with Cat5e, Cat 6a and various other protocols ranging from the traditional 90 Ohm USB 2.0 to the more widely used 110 Ohm IEEE 1394 "fire wire." Available in both cable-applied and printed circuit board varieties, the CeeLok FAS-T connector uniquely provides a means of transmitting high speed signals from the printed circuit board to system peripherals without sacrificing speed, panel space, or environmental performance.

Associated products that complement the new CeeLok FAS-T connectors are available and include band straps, termination devices, molded boots, wire and cable and complete harnessing capabilities.

Press release issued by TE Connectivity on April 2, 2012

 

 Contact details from our directory:
TE Connectivity Mechanical Switches, Relays, Electrical & Electronic Connectors, Electronic Components, Electrical Wire & Cable, High Temperature Tape, Sensors/Transducers, Electrical Terminals/Splices

 

 Related directory sectors:
Electrical/Electronic Connectors

Enhanced listings:


Midland Aerospace
Manufacturer of complex 3- and 5-axis CNC machined and fabricated detail components & assemblies for the aerospace & defence market sectors.

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

Dymax Corporation
A leading manufacturer of advanced light-curable adhesives, maskants, coatings, oligomers, light-curing equipment, and fluid dispense systems.

Attwater Group
Attwater are manufacturers and machinists of thermoset, high pressure composite sheets to recognised international standards.

Fine Tubes
Manufacturer of precision tubes in high strength titanium, stainless steel and nickel alloys, seamless, welded or welded & redrawn

See our advertising tariff.

 

12
data pages remaining in monthly quota for non-subscribers

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2017. Terms & Conditions of reading.