Log in to use our free company, program and sector update tracker feature.

Front page

Emission free power for civil aircraft

Airbus has successfully tested a fuel cells system in flight. For the first time on a civil aircraft this innovative energy source powered the aircraft's back-up hydraulic and electric power systems. The test conducted in February is part of Airbus' overall plans for an eco-efficient aviation industry. It supports the on-going research to evaluate the potential use and environmental benefits of fuel cell technology and zero emissions power generation in civil aviation.

No emissions, only pure water produced as a by-product of the fuel cell system

During the test, the hydrogen and oxygen based fuel cell system generated up to 20 Kilo Watts (kW) of electrical power. The emission free fuel cell system generates water as a "waste" product. The fuel cell system powered the aircraft's electric motor pump and the back-up hydraulic circuit and also operated the aircraft's ailerons. The system's robustness was confirmed at high gravity loads ("g" loads) during turns and zero gravity aircraft manoeuvres. During the flight test, the fuel cells produced around 10 litres of pure water.

Environmental benefits and operational savings

Fuel cells offer tremendous potential environmental benefits and operational savings.

They are emission free and the by-product, which is water, could be used for the aircraft water and waste systems, making the aircraft lighter and thus increasing the aircraft's fuel efficiency.

Further developments could lead to reducing noise and emissions around airports

This achievement will enable Airbus and its partners to further develop ways to implement fuel cell technology for replacing other aircraft systems such as the emergency power systems and the Auxiliary Power Unit (APU). This would significantly reduce the noise and emission levels in and around airports.

Fuel Cell system tested on the DLR A320 test aircraft

The fuel cell system developed by Airbus and Michelin was tested on the A320 test aircraft owned by the DLR, the German Aerospace Center. Airbus has been working on fuel cell technology in cooperation with Michelin, Liebherr Aerospace and DLR since the end of 2005.

Press release issued by Airbus S.A.S. on March 14, 2008


 Contact details from our directory:
Airbus S.A.S. Airframer

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Victrex Plc
New VICTREX® AE250 composites and hybrid molding technology are changing the equation in Aerospace composites – find out more!

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

Dexmet Corporation
Dexmet MicroGrid® an innovative product line that help improve the composite aircraft withstand the rigors of a lightning strike

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.