Log in to use our free company, program and sector update tracker feature.

Front page

PCB Piezotronics Model 378C Series 1/4" microphone

PCB Piezotronics introduces new 1/4" acoustic measurement microphones

PCB Piezotronics, Inc., a global leader in the design and manufacture of microphones, vibration, force, torque, load, strain, and pressure sensors, as well as the pioneer of ICP® technology is pleased to announce a new ?" prepolarized microphone series to complement its line of acoustic products. Models 378C01 and 378C10 are microphone and preamplifier combinations designed to measure very high frequencies and high amplitudes. The distinguishing features for this series are the microphone frequency capability, which can accurately measure to 100 kHz, and the amplitude range of 165 dB (re 20mPa), commonly referred to as the 3% distortion limit.

Model 378C01 is a Free-Field microphone and preamplifier making it suitable for automotive and aerospace noise source location and array applications. Other common applications include biological and medical acoustic analysis, machine monitoring and defect detection, gunshot analysis, cabin noise and other applications such as testing in anechoic chambers. Model 378C10 is a Pressure Response microphone typically used in noise absorption applications within impedance tubes, or general noise testing in cavities or small enclosures.

PCB® carries a full compliment of prepolarized condenser microphones and preamplifiers. Powered by a 2-20 mA signal conditioner and standard coaxial cables, these modern designs are extremely popular due to significant cost savings in power supplies and cabling. The prepolarized designs can also be used with the same constant current source used for ICP® accelerometers, thereby minimizing set-up time. IEC 61094 compliant prepolarized condenser microphones are built around the ICP® sensor technology that PCB® invented. PCB® also offers the traditional externally polarized microphones that run off of a 200V power supply. All microphones are offered with a "Total Customer Satisfaction" policy.

Press release issued by PCB Piezotronics Inc on September 7, 2012


 Contact details from our directory:
PCB Piezotronics Inc Inspection Test Accelerometers, Sensors/Transducers, Test Equipment, Calibration Equipment & Services, Microphones, Vibration Analysis, Acoustic Test Equipment


 Related directory sectors:
Test Equipment
Sensors, Transducers & Detectors

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

Dexmet Corporation
Dexmet MicroGrid® an innovative product line that help improve the composite aircraft withstand the rigors of a lightning strike

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.