Log in to use our free company, program and sector update tracker feature.

Front page

Northrop Grumman begins assembly of first F-35 production jet

Northrop Grumman Corporation (NYSE:NOC) has begun assembling the center fuselage for the first production Lightning II jet, a weight-optimized, U.S. Air Force F-35A conventional take-off and landing (CTOL) variant designated AF-6. The center fuselage is the core structure around which the F-35 aircraft is built.

The assembly process began March 24 at the company's Palmdale Manufacturing Center with the loading of an all-composite air inlet duct into a special tooling structure called a jig. This first assembly process, one of approximately 18 major steps in assembling an F-35 center fuselage, consists of attaching metal frames around the duct. The frames serve to brace and position the duct properly within the center fuselage.

"Jig loading the AF-6 center fuselage is significant because it shows the F-35 program is successfully transitioning from the system development and demonstration (SDD) phase into the production phase," said Janis Pamiljans, vice president and F-35 program manager for Northrop Grumman's Integrated Systems sector. "Through a disciplined approach to managing costs and engineering changes, we've reduced our average center fuselage assembly time by approximately 28 percent since the SDD program began."

To illustrate his point, Pamiljans noted that the company had started assembling the AF-6 center fuselage approximately one week sooner than the date indicated by the F-35 program's master schedule.

Northrop Grumman is a principal partner and founding member of the F-35 industry team led by Lockheed Martin. To date, the company has delivered eight of 19 SDD center fuselages - three for the Air Force and five for the U.S. Navy and U.S. Marine Corps - with the remaining 11 currently in the assembly flow in Palmdale. The company has also begun work on three LRIP jets, including AF-6.

Final assembly of all F-35 jets is performed by Lockheed Martin at a facility in Fort Worth, Texas. The process includes mating a Northrop Grumman-built center fuselage to an aft fuselage produced by BAE Systems, and the forward fuselage/cockpit and wings produced by Lockheed Martin.

The F-35 Lightning II is a stealthy, supersonic multi-role fighter designed to replace a wide range of aging fighter and strike aircraft. It is being produced in three variants - CTOL, short take-off/vertical landing (STOVL) and a carrier variant (CV) - to meet the diverse performance needs of the U.S. Air Force, the U.S. Marine Corps, the U.S. Navy and allied defense forces worldwide. The three variants use a high degree of commonality to meet strict affordability requirements.

Northrop Grumman's roles on the F-35 team include producing the aircraft's center fuselage, key radar and electro-optical subsystems, and its communication, navigation and identification avionics. The company also provides mission systems and mission-planning software; and develops pilot and maintenance training systems.

Northrop Grumman Corporation is a $32 billion global defense and technology company whose 120,000 employees provide innovative systems, products, and solutions in information and services, electronics, aerospace and shipbuilding to government and commercial customers worldwide.

Press release issued by Northrop Grumman Aerospace Systems on April 1, 2008


 Contact details from our directory:
Northrop Grumman Aerospace Systems Airframer
BAE Systems plc Airframer
Lockheed Martin Aeronautics Company Airframer


 Related aircraft programs:
Lockheed Martin F-35 Lightning II


 Related directory sectors:
Airframe Assemblies

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

USA Borescopes
USA Borescopes is a global supplier of world class visual inspection equipment. We are the one stop source for aviation professionals.

Samuel, Son & Co.
Looking for a quality metals supplier? Samuel can provide Aircraft Quality metals that meet Commercial and Military specifications

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

See our advertising tariff.


data pages remaining in monthly quota for non-subscribers

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.