Log in to use our free company, program and sector update tracker feature.

Front page

The receiver offers true Fail-Safe operation, providing a guaranteed logic high output when the bus is open-circuit, short-circuit or idle (terminated but not driven). The receiver’s worst case minimum input resistance is at least 70 kΩ at 200°C.

Holt Integrated Circuits introduces RS-485/422 transceivers capable of -55C to 200C operation

Holt Integrated Circuits today announced the introduction of a family of RS-485/422 transceivers capable of operating in temperatures from -55°C to 200oC. The HI-4853H family is capable of data rates up to 20Mbps (50 ft. CAT-5 UTP).

All devices in the family offer extended power supply range (3.15V to 5.5V), controlled slew rate and a wide common mode voltage range (-12V to +15V for half-duplex, ± 20V for full-duplex). Each device delivers at least ± 1.50V and ± 2.00V output drive at worst-case supply voltages of 3.15V and 4.5V respectively, over an extended temperature range of -55°C to +200°C into a differential load of 54Ω and 50pF.

"This family of devices provides customers with the capability of operating in extremely harsh environments, with all device parameters guaranteed across the full temperature range -55°C to +200°C," said Anthony Murray, Director of Business Development at Holt. "These devices are targeted at high temperature avionics and industrial applications such as MMSI / EBR-1553 and down-hole drilling."

The HI-4853H operates half duplex whereas the HI-4854H and HI-4855H provide full duplex operation. Operation up to 200°C is guaranteed in an 8-pin CERDIP package with industry standard pin-outs, whereas plastic SOIC package options guarantee operation up to 175°C.

Press release issued by Holt Integrated Circuits, Inc. on October 24, 2012


 Contact details from our directory:
Holt Integrated Circuits, Inc. Electronic Components, Circuits, Data Bus


 Related directory sectors:
Passive Electronic Components
Active Electronic Components

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

General Plastics Manufacturing Co.
General Plastics has been supplying OEMs, Tier 1 and Tier 2 companies with flame-retardant foam core materials and custom flexible foam molded parts for aircraft flight decks and interior cabins for over 50 years.

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

The leading provider of heat treatment services worldwide. Bodycote offers high quality, reliable and cost-effective services to manufacturers whatever their size or market sector.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.