Log in to use our free company, program and sector update tracker feature.

Front page

Trick gives helicopters more 'puff' – DLR tests the influence on airflow when blowing air out of rotor blades

Researchers at the German Aerospace Center (Deutsches Zentrum fuer Luft- und Raumfahrt; DLR) in Goettingen have discovered a way to make helicopters more manoeuvrable. In a globally unique wind tunnel experiment, they have been blowing air through holes in the rotor blades to actively influence airflow.

As though someone is wielding a sledgehammer

The rotor gives the helicopter its unique ability to take off and land vertically. But this also has its aerodynamic disadvantages. During rapid forward flight or manoeuvring, airflow stalls on the main rotor blade of a helicopter as the blade moves backwards, giving rise to what is referred to as 'dynamic stall'. This causes turbulence, lift is lost and enormous forces act on the rotor. Air resistance increases and the rotor head control rods are subjected to enormous dynamic loads.

"It is just as though someone is striking the rotor with a sledgehammer," explains Anthony Gardner from the DLR Institute of Aerodynamics and Flow Technology. The result is that the maximum speed and the manoeuvring capability of helicopters are restricted, especially at high altitudes.

The concept devised by the researchers in Goettingen acts like a kind of aerodynamic damper on helicopter rotors. Air is forced outwards through small holes in the rotor blades, which reduces the amount of harmful turbulence when stalling occurs. This enables the pitching moments exerted on the rotor blades – that restrict performance – to be substantially reduced. "During difficult flight manoeuvres, the pilot has the option of engaging this function for brief periods. At this point," continues Gardner, "aerodynamic forces cease to act like sledgehammer blows on the rotor, becoming more akin to taps with a rubber mallet."

A complex experiment

There is nothing new about the idea of actively influencing aircraft aerodynamics by blowing air in this way. Back in the 1940s, researchers in Goettingen were already working on this. Now, for the first time, their successors have successfully demonstrated that the idea works on helicopters – in a wind tunnel experiment under realistic conditions. "This experiment is the most complex ever performed in the field of dynamic stall control," says Kai Richter from the DLR Institute of Aerodynamics and Flow Technology. He is head of the STELAR (Stall and Transition on Elastic Rotor Blades) project, which has been carried out jointly with the DLR Institute of Aeroelasticity.

Recently, DLR researchers in Goettingen tested a passive method for influencing airflow, drawing their inspiration from the bumps on the pectoral fins of humpback whales. "It was only very recently that we acquired the computational power to be able to calculate what a wind tunnel model of this kind should look like," says Gardner. The apparently trivial questions of how widely spaced and how large these holes should be to obtain a positive effect have now been resolved with the help of the supercomputers at DLR.

Forty-two holes

These experiments took place in the Transonic Wind Tunnel in Goettingen, a wind tunnel unique in Germany in terms of its speed range capability. This facility, measuring 50 metres in length and 12 metres in height is able to simulate how aircraft behave when travelling at close to the speed of sound in what is known as the 'transonic range' (about 1000 kilometres per hour) and beyond – at speeds of over twice the speed of sound or Mach 2.2. For these tests, a one-metre segment of a rotor blade was installed in the wind tunnel. "It was equipped with the latest measuring technology," says Gardner. A compressed air system with a complex set of valves blows air through 42 openings each measuring three millimetres in diameter. Seventy-four sensors measure pressures on the rotor blade up to 6000 times a second; this enables the airflow to be depicted precisely.

In a next step, these results will be checked on a new rotor test bench with a rotating rotor.

Press release issued by DLR - German Aerospace Center on February 8, 2013


 Contact details from our directory:
DLR - German Aerospace Center Fuel Cells, Testing Services, Research/Consulting Services, Composite Design Consultants, Flight Simulators, Instrument Landing Systems


 Related directory sectors:
Test Services

Enhanced listings:

Ascent Aerospace
Ascent Aerospace is the leading provider of aerospace tooling systems, assembly automation and factory integration.

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

Dexmet Corporation
Dexmet MicroGrid® an innovative product line that help improve the composite aircraft withstand the rigors of a lightning strike

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.