Log in to use our free company, program and sector update tracker feature.
 

Front page

New silver conductive, one part aqueous based sodium silicate system available for EMI/RFI shielding

Master Bond MB600S is an aqueous based sodium silicate formulated for coating applications where electromagnetic interference/radio frequency interference (EMI/RFI) shielding is required.

The energy emitted from various sources, including radios and appliances, can interfere with other electronic devices. Conductive coatings are often applied to the housings in order to protect the devices from these types of interferences. This silver gray colored system is used in a variety of aerospace and electronic applications.

Tested according to IEEE 299, 2006 methods, MB600S was as effective as the aluminum reference with a range of 95-105 dB, from 100 MHz to 2 GHz. Above 2 GHz, the shielding effectiveness of MB600S decreased to 80 dB and slightly below. Above 4 GHz, the effectiveness was 60-70 dB.

As the system is water based, it is relatively non-toxic and easy to handle. It can be brushed or sprayed with the proper equipment. If sprayed, the shielding effectiveness would be even greater than the values given above.

MB600S will cure at room temperature in 24-48 hours or in 1-2 hours at 80°C. It features high temperature resistance with a service temperature range of 0°F to 700°F. The compound is available in glass jars, and has a shelf life of 6 months in original, unopened containers at room temperature.

Press release issued by Master Bond Inc. on May 28, 2013

 

 Contact details from our directory:
Master Bond Inc. Electronic Circuitry Conformal Coatings, Adhesives, Conductive Adhesive, Epoxy Adhesive, Fire Resistant Adhesive, Glass-to-Metal Adhesive, Metal-to-Metal Adhesive, Optical Adhesive, Pressure-Sensitive Adhesive, Rubber Adhesive, Silicone Adhesive, Potting Compounds, Thread Locking Compounds, Fuel Tank Sealants, Coatings, Chemical Agent Resistant Coatings

 

 Related directory sectors:
Coatings

Enhanced listings:


Ascent Aerospace
Ascent Aerospace is the leading provider of aerospace tooling systems, assembly automation and factory integration.

IHS ESDU
Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

Dymax Corporation
A leading manufacturer of advanced light-curable adhesives, maskants, coatings, oligomers, light-curing equipment, and fluid dispense systems.

ESPEC North America Inc. | Qualmark
Qualmark is your industry leading manufacturer and partner for accelerated reliability testing, HALT and HASS, for all commercial and defense avionics.

See our advertising tariff.

 

8
data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2018. Terms & Conditions of reading. Privacy policy