Log in to use our free company, program and sector update tracker feature.

Front page

Araldite® FST 40002 / 40003 is a radically different development

Huntsman Advanced Materials unveils novel FST thermoset solution for lightweight composite interior aerostructures

With operating costs continuing to rise and the perceived need to improve the revenue potential on each and every new aircraft being commissioned, both the OEM and supply sectors of the aerospace industry are evaluating all aspects of design and weight optimisation.

International airshows over the last few years have seen a ubiquitous emphasis on this issue, with an increasing focus on the role of advanced composites. Huntsman Advanced Materials has been a pioneer among the commercial developers of this technology, with composites materials that are valued for reducing weight with the consequential positive impact on fuel consumption and greenhouse gas emissions.

Most recently the attention has shifted somewhat from the airframe to aircraft interiors in the continuous drive for weight reduction. For many commercial aircraft interior use of composites is just as crucial to the cost : revenue equation, as the weight of composite interiors actually exceeds that of the airframe.

From overhead bins and ceiling panels to cabin dividers, galleys and bulkheads, the use of interior composites in the pursuit of weight reduction vies with lighter textiles and leathers on seating, lighter food carts, the elimination of in-flight magazines and thinner display screens to achieve the desired results.

Huntsman Advanced Materials has launched an entirely new high-performance and inherently flame resistant solution for RTM and infusion processing which offers greater strength whilst answering continued demand for weight reduction in interior aerospace designs.

Araldite® FST 40002 / 40003 is a radically different development that provides a unique combination of high mechanical, fire, smoke and toxicity (FST) performance alongside high quality, user-friendly composites processing conditions enabling efficient production of interior carbon and glass composites parts with maximised weight savings. 

The mixed two-component system exhibits a low viscosity at working temperatures above 50°C. The latency range from 50°C to 100°C provides the ability to produce complex parts in small and large dimensions. In addition, Araldite FST 40002 / 40003 has a low reaction energy of about 220 J/g which eliminates bulk exothermic safety issues and enables large thickness composite part production.

In comparison to traditional RTM and infusion systems, its viscosity and reactivity profile shows snap-cure behaviour which allows fast Tg and interlaminar shear strength (ILSS) development. Also, after pre-cure conditions of approximately one hour at 100°C followed by one hour at 120°C, the system can be demolded, resulting in molding time and mold cost optimisation. Indeed after the latter pre-cure conditions, the system develops 85-90% of its ultimate ILSS – when measured on carbon fabric reinforcement.

Pre-curing is followed by two-hour post-curing at 180°C, which can be done either in the mold or freestanding, to enable the ultimate performance development.

Araldite® FST 40002 / 40003 develops dry and wet Tg of 260°C and 185°C (measured by DMA) with very high ILSS performance of 97 MPa and 55 MPa at 23°C and 120°C respectively – when measured on unidirectional carbon reinforcement. Surprisingly for a system with such high Tg and high crosslinking density, it also exhibits high tensile elongation and appreciable toughness, enabling the substitution of metal in highly structural applications.

In contrast to other materials used in interiors, Araldite® FST 40002 / 40003 is an unfilled system. The inherent FST properties of the system come from the chemical nature of the network and its high cross-link density. The new system meets the FAR 25.853 vertical burn, smoke and toxicity requirements with both carbon and glass fibre in all thickness configurations.

The heat release of the system is highly dependent on composite thickness, making it ideally suited for non-visible parts in the interior that do not have direct contact with potential ignition sources as well as cockpit parts that currently do not need to pass heat release. 

Due to the filtration effect, filled systems are processed with open fabric where low fibre content sacrifices composites performance. With the new Araldite® system, the combination of excellent matrix mechanical properties and high fibre volume capabilities maximise performance, meeting industry demand for further weight savings.

By comparison to phenolic resins which are subject to a polycondensation type reaction and are used for non and semi-structural applications, Araldite® FST 40002 / 40003 undergoes a polyaddition reaction without gas release. This enables significant weight reduction, improved composites quality, elimination of intensive part production post-operations as well as a cleaner and healthier manufacturing solution for operators, supporting closed mold processes and VOC emissions free system exposure.

Olivier de Verclos, Technical Support, Composites & Tooling Team Leader, summarised: “Advanced composites processes and materials are essential for high-performance fibre reinforced composites to penetrate the aerospace market to their full potential. With Araldite® FST 40002 / 40003, we are taking RTM and infusion processing into a new dimension to provide improved strength for lighter and mechanically superior parts which can be cost-effectively produced for the first time.

This innovative high-performance solution creates a radically new and much improved value proposition for aerospace designs, providing a preferred alternative to metal in structural applications and phenolics in non and semi-structural applications.”

Aircraft manufacturers are expected to deliver in excess of 17,000 new aircraft in the decade 2012-2022, including dedicated cargo planes.

The use of interior composites is expected to increase by some 50% over the period with the joint interests of operators and conservationists in the link between weight reduction and reduced carbon emissions. With its track record in this sector, Huntsman Advanced Materials expects to consolidate its role as an innovator where product development impacts directly upon operator profitability.

Press release issued by Huntsman Advanced Materials (UK) Ltd on September 5, 2013


 Contact details from our directory:
Huntsman Advanced Materials (UK) Ltd Epoxy Resins, Composite Adhesive


 Related directory sectors:

Enhanced listings:

Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

General Plastics Manufacturing Co.
General Plastics has been supplying OEMs, Tier 1 and Tier 2 companies with flame-retardant foam core materials and custom flexible foam molded parts for aircraft flight decks and interior cabins for over 50 years.

Victrex Plc
New VICTREX® AE250 composites and hybrid molding technology are changing the equation in Aerospace composites – find out more!

USA Borescopes
USA Borescopes is a global supplier of world class visual inspection equipment. We are the one stop source for aviation professionals.

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

See our advertising tariff.


data pages remaining in monthly quota for non-subscribers

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.