Log in to use our free company, program and sector update tracker feature.
 

Front page

The GP:50 Model 188/288/388 series features an all-welded stainless steel construction

GP:50 Corporation introduces miniature flush diaphragm pressure transducers for demanding process measurements

GP:50 Corporation LTD, an ISO9001 certified global manufacturer of accurate, reliable static pressure sensing instrumentation, today introduced its Model 188/288/388 miniature flush diaphragm pressure transducer series.

The unique flush diaphragm design of the GP:50 Model 188/288/388 now makes possible accurate pressure measurements of high-viscosity fluids, even within high shock and vibration environments, without port plugging and clogging. This makes the series particularly useful for the support of aerospace and automotive test stands; chemical and pharmaceutical processing, plastics extrusion; and adhesive, sealant and paint systems. 
The GP:50 Model 188/288/388 series features an all-welded stainless steel construction and incorporates a 7/16-20 UNF pressure port that eliminates any zero installation effect. Standard wetted parts are made from stainless steel, with optional substitution of Inconel or Hastelloy. The standard operating temperature range for the Model 188/288/388 is -65°F to +250°F (-54°C to +121°C), with an optional high-temperature version to +350°F (+177°C).

Model 188 is the smallest transducer of the family, with an overall length of just 1.35 in. (34 mm). It can measure fast events due to its high-frequency response, typically less than 3 kHz. Model 188 operates over a standard range of 300 PSI to 20k PSI (21 to 1,379 BAR), with total accuracy to ±0.25% RSS. Output signal is 2 mV/V, with a bridge impedance of 5000 Ω (350 Ω optional). Typical thermal shift is ±2%/100°F, both zero and span.

Models 288 and 388 measure 2.67 in. (68 mm) and are available with choice of either voltage or current output. The Model 288 further offers a DC output, proportional to pressure, of 0-5 Vdc and 0-10 Vdc. Model 388 is a loop-powered device (4-20 mA) with a current output proportional to pressure. Both models operate over a standard range of 100 PSI to 20k PSI (7 to 1,379 BAR) with ±0.25% FSO (RSS) accuracy. Optional improved accuracy is available to ±0.05% FSO. Typical thermal shift is ±0.5%/100°F (zero and span), with optional improvement to ±0.25%/100°F. Additional options include various electrical connectors; alternative wetted ports; temperature outputs; and sensor choices of RTD, Type J and Type K thermocouples. Further transducer customization may also be available. Please consult the factory for details.

All Model 188/288/388 pressure transducers are 100% manufactured and tested at the company's state-of-the-art manufacturing facility in Grand Island, New York, USA. They are further supported by an active global sales and distribution network.

Press release issued by GP:50 NY Ltd on September 30, 2014

 

 Contact details from our directory:
GP:50 NY Ltd Transducers, Sensors/Transducers, Pressure Detectors, Temperature Detectors, Liquid Level Sensors

 

 Related directory sectors:
Sensors, Transducers & Detectors

Enhanced listings:


Ascent Aerospace
Ascent Aerospace is the leading provider of aerospace tooling systems, assembly automation and factory integration.

Capacitec
Capacitec Gapman Gen3 portable “electronic feeler gauge” measures very small gaps (200 microns) in airframe parts assembly

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

Indestructible Paint Ltd
A developer and manufacturer of specialist, technology coatings to support the lifetime of aviation, defence and general industry.

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors and avionics.

See our advertising tariff.

 

8
data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2018. Terms & Conditions of reading. Privacy policy