Log in to use our free company, program and sector update tracker feature.

Front page

Master Bond EP42HT-2LTE is high temperature resistant, two part epoxy with an ultra low thermal expansion coefficient

Two part, room temperature curing epoxy features ultra low coefficient of thermal expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat.

This system is notable for having a low coefficient of thermal expansion of 9-12 x 10-6 in/in/°C. With a tensile lap shear strength of over 1,200 psi, it bonds well to a wide variety of similar and dissimilar substrates, including metals, composites, ceramics, glass and many plastics. EP42HT-2LTE features superior electrical insulation properties, chemical resistance and dimensional stability over the wide service temperature range of -60°F to +300°F. It also offers low linear (<0.01%) and volumetric (<0.1%) shrinkage upon curing, which is useful for potting and encapsulation applications.

Featuring a light cream color, EP42HT-2LTE is prepared using a non-critical 100 to 40 mix ratio by weight or a 100 to 50 mix ratio by volume. After mixing a 100 gram batch, its working life is 60-90 minute open time. This product is available in standard packaging with sizes ranging from ½ pint to 5 gallon kits.

Press release issued by Master Bond Inc. on January 9, 2015


 Contact details from our directory:
Master Bond Inc. Electronic Circuitry Conformal Coatings, Adhesives, Conductive Adhesive, Epoxy Adhesive, Fire Resistant Adhesive, Glass-to-Metal Adhesive, Metal-to-Metal Adhesive, Optical Adhesive, Pressure-Sensitive Adhesive, Rubber Adhesive, Silicone Adhesive, Potting Compounds, Thread Locking Compounds, Fuel Tank Sealants, Coatings, Chemical Agent Resistant Coatings


 Related directory sectors:
Non-metal Materials

Enhanced listings:

Reduce the time spent on current projects by using ESDU – engineering data and software that have been approved and endorsed by professional institutions.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.