Log in to use our free company, program and sector update tracker feature.
 

Front page

High temperature resistant, one part Fluorosilicone offers superior chemical resistance

With enhanced chemical resistance Master Bond MasterSil 930 is an acetoxy type fluorosilicone for bonding, sealing and coating applications in aerospace, electronics, specialty OEM and other industries. This one part system is able to withstand exposure to water, fuels, oils, greases, refrigerants, acids, bases and solvents better than standard silicones.

MasterSil 930 has a paste viscosity, and as a one part system, it is easy to handle. It cures relatively quickly with a tack free time of 20-30 minutes, depending upon the thickness. Thinner sections cure more rapidly than thicker ones. Typical of one part silicones, the curing mechanism is based on the humidity level; the higher it is, the faster the cure. With a tensile strength of 800-1,100 psi, this compound bonds well to a wide variety of substrates including metals, composites, ceramics, glass, rubbers, plastics and other silicones.

Featuring a hardness of 30-40 Shore A, MasterSil 930 is a flexible system and resists rigorous thermal cycling as well as mechanical and thermal shock. It is electrically insulative and has a volume resistivity of over 1014 ohm-cm. Its service temperature range is -85°F to +450°F. MasterSil 930 is white in color and available for use in 80 gram tubes.

Press release issued by Master Bond Inc. on September 22, 2015

 

 Contact details from our directory:
Master Bond Inc. Electronic Circuitry Conformal Coatings, Adhesives, Conductive Adhesive, Epoxy Adhesive, Fire Resistant Adhesive, Glass-to-Metal Adhesive, Metal-to-Metal Adhesive, Optical Adhesive, Pressure-Sensitive Adhesive, Rubber Adhesive, Silicone Adhesive, Potting Compounds, Thread Locking Compounds, Fuel Tank Sealants, Coatings, Chemical Agent Resistant Coatings

 

 Related directory sectors:
Adhesives

Enhanced listings:


AC Products, Inc.
Full line of peelable maskants for chemical milling, etching, anodizing, acid stripping, plating and more.

Peli Hardigg UK
Peli-Hardigg is the world’s largest manufacturer of aerospace approved reusable plastic shipping and storage containers, built to last a lifetime.

FGL Precision Ltd
FGL Precision manufactures fine quality components for the aerospace and defence markets where consistent performance is critical.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

TenCate Advanced Composites
TenCate Advanced Composites is a leading provider of thermoset and thermoplastic prepregs to the aerospace industry.

See our advertising tariff.

 

8
data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2018. Terms & Conditions of reading. Privacy policy