Log in to use our free company, program and sector update tracker feature.

Front page

Huntingdon releases PurgExtra tube and pipe purging system

Weld purging is essential when welding metal tubes and pipes made from titanium, ultra high purity stainless steel joints and just as important when welding those less critical stainless steel and copper nickel pipe joints, in order to achieve non-oxidised, zero colour welds.

PurgExtra® is the latest weld purging product released by Huntingdon Fusion Techniques HFT® for the purging of tube and pipe joints from 1 – 24” ø. This range complements the PurgElite® series, but has extra purge gas inlets and corresponding exhaust ports.

Luke Keane, Distributor Support for HFT® said: “The PurgExtra® System allows the operator to purge at recommended rates initially and then when it would be an advantage, to introduce additional purge gas to create the desired results. Typical applications are for extra inert gas with titanium welds to achieve the lower oxygen levels required for welding that material, which would be around 20 parts per million.”

When welding joints where interpass temperature control is necessary, PurgExtra® allows extra argon gas into the welding zone, which will help cooling dramatically. Also for the removal of additional gases that are expelled by the outgassing that occurs as the metal is being heated. The extra gas flow will prevent these expelled gases from combining with the hot metal and oxidising them, which causes the metal to discolour and lose its corrosion resistance.

PurgExtra® comprises of two inflatable dams connected by a heat resistant, highly flexible gas hose that has the unique IntaCal® gas release system. IntaCal® allows the dams to be inflated correctly and then releases the inert gas to safely purge the space between the dams and replaces the old fashioned, complicated valves, still used by other types of purging devices, that might sometimes fail causing the dams to burst.

The highly flexible spinal hose between the dams allows the PurgExtra® Systems to be pulled or pushed easily around bends and elbows. In the centre of the spinal hose a strip of RootGlo® material is adhered, allowing the welder to see clearly when the PurgExtra® System has reached the correct position in the pipe. RootGlo® can be charged by exposing it to daylight for 10 minutes, after which it will provide up to 24 hours of bright illumination inside the pipe.

The innovative PurgeGate® Valve may be fitted to the PurgExtra® Systems as an accessory, to protect the inflatable dams from bursting due to accidental or faulty opening of gas supply valves significantly above the recommended flow rate.

Heat Resistant Covers are also available for PurgExtra®, which fit onto the inflatable dams and allow operation with post-weld heat-treated pipe joints where the temperatures might reach 760°C.

Press release issued by Huntingdon Fusion Techniques, HFT on May 10, 2016


 Contact details from our directory:
Huntingdon Fusion Techniques, HFT Welding, Test Equipment


 Related directory sectors:
Metal Processes

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

Victrex Plc
New VICTREX® AE250 composites and hybrid molding technology are changing the equation in Aerospace composites – find out more!

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

Samuel, Son & Co.
Looking for a quality metals supplier? Samuel can provide Aircraft Quality metals that meet Commercial and Military specifications

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.