Log in to use our free company, program and sector update tracker feature.

Front page

The first of 15 Block 40 Global Hawk unmanned aircraft reconnaissance system is unveiled by Northrop Grumman and U.S. Air Force officials

Northrop Grumman and U.S. Air Force unveil next-generation of high-flying Global Hawk unmanned aircraft

Northrop Grumman Corporation (NYSE:NOC) and the U.S. Air Force unveiled the next-generation of high-flying unmanned aircraft - the RQ-4 Block 40 Global Hawk - in a ceremony today at Northrop Grumman's Palmdale, Calif., manufacturing facility.

"This unveiling of the first of 15 Block 40 aircraft is a significant step to fielding Global Hawk to Grand Forks Air Force Base, North Dakota, in 2010 and reaffirms our excellent track record of delivering Global Hawks since low rate production began," said Duke Dufresne, sector vice president for Northrop Grumman Aerospace System's Strike and Surveillance Systems Division. "Carrying an advanced, all-weather multi-platform radar technology insertion program (MP-RTIP) sensor, the Block 40 aircraft will provide game-changing situational awareness for our warfighters with its unprecedented capability to detect, track and identify stationary and moving targets."

Use of the MP-RTIP sensor on the Block 40 Global Hawks marks the first time the active electronic scanned array (AESA) technology has been used on a high-altitude unmanned aircraft. AESA technology provides all-weather, day-night synthetic aperture radar mapping and ground moving target indicator capability.

"The Global Hawk system is in high demand by joint warfighters overseas, having successfully flown more than 31,000 hours since 2001," said Steve Amburgey, Global Hawk program director for the 303rd Aeronautical Systems Group at Wright-Patterson Air Force Base, Ohio. "Congratulations to the entire Global Hawk team for continuing to provide our service men and women with a reliable intelligence, surveillance and reconnaissance (ISR) system."

Designated AF-18, this Block 40 aircraft was the 27th Global Hawk built since the program's inception in 1995 and is scheduled to begin flight testing next month.

"This magnificent aircraft represents the future of Grand Forks Air Force Base. This and the rest of the Block 40 fleet will make significant contributions to the safety and security of our nation for years to come," said Sen. Kent Conrad of North Dakota. "I look forward to seeing this airframe on the Grand Forks ramp next year."

Global Hawk's range, endurance and large payload capabilities are well suited to support a variety of customers and missions, including environmental and Earth science research, homeland security, border and coastal patrol, hurricane and fire monitoring, and other disaster relief support activities. Global Hawk effectively provided imagery of the California wildfires in 2007 and 2008, and of Hurricane Ike in 2008.

Flying at altitudes of more than 60,000 feet for more than 32 hours per sortie at speeds approaching 340 knots, the MP-RTIP-equipped Block 40 Global Hawk can persistently see through most type of weather, day or night. As the world's first fully autonomous high-altitude, long-endurance unmanned aircraft system, Global Hawk is the platform of choice for a wide variety of sensors, foreign and domestic, meeting the global need for persistent ISR.

Northrop Grumman is the prime contractor for the Global Hawk and MP-RTIP programs and continues to move these technologies forward under the stewardship of the Air Force's Aeronautical Systems Center at Wright-Patterson Air Force Base, Ohio, and the Electronic Systems Center, located at Hanscom Air Force Base, Mass. Northrop Grumman's Norwalk, Conn., facility is the principal MP-RTIP radar developer along with principal subcontractor, Raytheon Space and Airborne Systems, El Segundo. The development MP-RTIP sensor is undergoing a radar system level performance verification on a surrogate aircraft, and will be integrated into AF-18 for an operational evaluation.

Northrop Grumman's Global Hawk program is based at its Aerospace Systems' Unmanned Systems Development Center in San Diego, Calif. The company performs Global Hawk sub-assembly work at its Unmanned Systems Center in Moss Point, Miss., and final assembly at its Antelope Valley Manufacturing Center in Palmdale.

Press release issued by Northrop Grumman Aerospace Systems on June 26, 2009


 Contact details from our directory:
Raytheon, Space and Airborne Systems Infrared Target Designators, Surveillance/Air Defense Radar, GPS, Airborne Reconnaissance Infrared, Reconnaissance Radar, IFF Interrogators, Radio Communications Equipment, Weapons Countermeasures
Northrop Grumman Aerospace Systems Airframer


 Related aircraft programs:
Northrop Grumman RQ-4 Global Hawk


 Related directory sectors:
Imaging and Visual Systems

Enhanced listings:

Ascent Aerospace
Ascent Aerospace is the leading provider of aerospace tooling systems, assembly automation and factory integration.

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

United Performance Metals
A global distributor and processor of titanium products for over 40 years, and a leading supplier to the aerospace industry

Belden Universal
Specialty universal joints and drive shafts, designed to satisfy even the most rigorous operating criteria. Belden Universal is AS9100C certified.

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.