Log in to use our free company, program and sector update tracker feature.
 

Front page

The fuselage of the second prototype IL-112V aircraft delivered to TsAGI

The third stage of transportation of elements of the light military transport aircraft IL-112V (0102) from Voronezh to Zhukovsky has been completed. IL-112V's fuselage was delivered at the Central Aero-Hydrodynamic Institute named after Professor Zhukovsky.

The transportation of aircraft elements was carried out in several stages. At the first stage – a stabilizer, aileron, flap, as well as several dozen containers with smaller parts of the aircraft structure were delivered from VASO to TsAGI; on the second – the wing section of the aircraft. The transportation was carried out at night. Oversized cargo moved from Voronezh to Zhukovsky on road trains, accompanied by traffic police.

The specialists of PJSC -IL- and TsAGI will have to assemble the airframe in the hall of static and resource tests of the Institute. Then the airframe will be ready for the isolated tests of individual units and full-scale static-resource research. Then the assembled airframe will be installed on a special stand, on which the loads on the aircraft will be simulated in all modes and numerous parameters will be recorded that characterize the behavior of the aircraft and its elements.

The tests of the aircraft are carried out at TsAGI to confirm design solutions in terms of static and fatigue strength. The aircraft will be subjected to multiple loads simulating at least 5,000 flights. Experiments will last about two years. Earlier, tests of structural elements of the IL-112V aircraft were completed in TsAGI, which confirmed the possibility of beginning flight tests of the aircraft.

Press release issued by Ilyushin Aviation Complex on December 28, 2018

 

 Contact details from our directory:
Ilyushin Aviation Complex Airframer

 

 Related aircraft programs:
Ilyushin IL-112

Enhanced listings:


Korea Jig and Fixture (KJF)
Leading tooling manufacturer in Korea, having competencies in large assembly jigs and moving lines.

AC Products, Inc.
Full line of peelable maskants for chemical milling, etching, anodizing, acid stripping, plating and more.

Dymax Corporation
A leading manufacturer of advanced light-curable adhesives, maskants, coatings, oligomers, light-curing equipment, and fluid dispense systems.

Sigma ASL Limited
Engineering and manufacturing company with in-house and outsourced operations, AS9100 accredited and fully NADCAP compliant.

Attwater & Sons Ltd T/A Attwater Group
Attwater are manufacturers and machinists of thermoset, high pressure composite sheets to recognised international standards.

See our advertising tariff.

 

5
data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2019. Terms & Conditions of reading. Privacy policy