Log in to use our free company, program and sector update tracker feature.
 

Front page

Kopter’s SH09 third prototype (P3) during initial flight tests in Switzerland.

Kopter's SH09 third prototype (P3) successfully completed initial flight tests in Switzerland

Following its first flight on 22 November 2018, Kopter's SH09 third prototype (P3) completed more than 50 hours of testing at the company facility in Mollis, Switzerland, where it has been produced and it is currently supported.

The aircraft climbed up to 5,000 ft and reached a speed of 126 kts, while performing a series of maneuvers such as turns, autorotations and short field take-off and landing profiles.

Kopter Chief Technical Officer & Head of flight Operations, Michele Riccobono commented: "the team is very pleased with the results of this flight test phase. The aircraft behaved as expected, confirming the initial design assumptions of the SH09 concept. We look forward to pursuing the flight test program in Sicily in order to complete the final optimization of our aircraft and freeze the configuration for the baseline Type Certificate".

P3 is getting ready to join its new flight test base in Pozzallo, Province of Ragusa, Sicily where it will perform an intensive flight test campaign to significantly open the flight envelope of the helicopter.

This campaign will allow confirming the aircraft's performance that are essential to our customers.

The Kopter team is finalizing the design of Pre-Series 4 (PS4), which incorporates optimizations derived from P3 operations.

In parallel to P3 flights, the design of PS4 is being finalized, with its build-up set to start in the next few months. An important evolution is the enlarged cabin of PS4, allowing to carry one more passenger, i.e. up to 8 passengers in addition to the pilot, resulting from the new design of the fuel tank system. The payload capabilities of the SH09 are confirmed, while the maximum take-off weight has been increased to 2,850 kg (3,000kg for external loads).

Once completed, PS4 will join the flight test activities of P3 in Sicily to contribute to reach the Type Certification. It will essentially be employed to develop the different mission configurations of the SH09, testing avionics, cabin interiors and optional equipment that will be available to customers.

An additional aircraft, Pre-Series 5 (PS5) will be added to the test fleet to specifically cover the extension of the flight envelope towards both hot & high conditions and low temperature operations.

Press release issued by Kopter Group on February 26, 2019

 

 Contact details from our directory:
Kopter Group Airframer

 

 Related aircraft programs:
Kopter SH09

Enhanced listings:


Highland Composites
Full-service provider of composite structures: state-of-the-art braiding technology, world-class expertise, suite of complementary processes

TenCate Advanced Composites, part of Toray Group
TenCate Advanced Composites is a leading provider of thermoset and thermoplastic prepregs to the aerospace industry.

Sigma ASL Limited
Engineering and manufacturing company with in-house and outsourced operations, AS9100 accredited and fully NADCAP compliant.

Interface Force Measurements Ltd
Accurate & reliable torque, force & pressure sensors, pressure mapping systems & calibration systems.

Attwater & Sons Ltd T/A Attwater Group
Attwater are manufacturers and machinists of thermoset, high pressure composite sheets to recognised international standards.

See our advertising tariff.

 

7
data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2019. Terms & Conditions of reading. Privacy policy