Log in to use our free company, program and sector update tracker feature.
 

Front page

CFM56-7BE jointly certified by U.S. FAA, Europe's EASA

CFM International's advanced CFM56-7BE engine for the Boeing Next-Generation 737 family has been jointly certified by the U.S. Federal Aviation Administration and European Aviation Safety Agency. The agencies issued the official engine Type Certificate on 30 July.

The engine is now on schedule to begin Boeing 737 flight test in the fourth quarter of this year. Entry into service is planned for mid-2011 to coincide with Boeing Next-Generation 737 airframe improvements.

Over the past year, the CFM56-7BE has completed 450 hours of ground and flight testing, In May of this year, the engine underwent a 60-hour certification flight test program aboard GE's modified 747 flying testbed in Victorville, California. In addition, the CFM56-7BE completed a grueling 150-hour block test at Snecma facilities in Villaroche, France, during which it operated at what is referred to as triple redline: maximum fan speed, maximum core speed, and maximum exhaust gas temperature. This test simulates conditions far more extreme than would ever be experienced in commercial service to validate the reliability and durability of the hardware.

The first full CFM56-7BE type design engine completed ground testing in January 2010, and engine operation and performance was as expected. Overall, the engine completed 390 hours of ground testing (including the block test) and achieved all the technical requirements and met the key objectives for performance improvement, acoustics, engine operation and durability.

The CFM56-7BE-powered Next-Generation 737 enhanced airplane/engine combination will provide a 2 percent improvement in fuel consumption, which, in turn, equates to a 2 percent reduction in carbon emissions. Additionally, the enhanced -7B will provide up to 4 percent lower maintenance costs, depending on the thrust rating.

CFM is using advanced computer codes and three-dimensional design techniques to improve airfoils in the high- and low-pressure turbines to improve engine performance. In addition, CFM is improving engine durability and reducing parts count to achieve lower maintenance costs.

Press release issued by CFM International Inc. on August 2, 2010

 

 Contact details from our directory:
CFM International Inc. Turbofan Engines

 

 Related aircraft programs:
Boeing 737

 

 Related directory sectors:
Engines

Enhanced listings:


Midland Aerospace
Manufacturer of complex 3- and 5-axis CNC machined and fabricated detail components & assemblies for the aerospace & defence market sectors.

EWI
The leading engineering and technology organization in North America dedicated to developing, testing and implementing advanced manufacturing technologies for industry.

TenCate Advanced Composites
TenCate Advanced Composites is a leading provider of thermoset and thermoplastic prepregs to the aerospace industry.

Oerlikon Balzers Coating AG
Oerlikon Balzers is one of the world’s leading suppliers of surface technologies

Dexmet Corporation
Dexmet MicroGrid® an innovative product line that help improve the composite aircraft withstand the rigors of a lightning strike.

See our advertising tariff.

 

12
data pages remaining in monthly quota for non-subscribers

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2017. Terms & Conditions of reading.