Log in to use our free company, program and sector update tracker feature.

Front page

GKN Aerospace sees clear improvements with new Wheelabrator air blast machine

Leading manufacturer GKN Aerospace Transparency Systems is flying through the cleaning process at its Birmingham site.

Thanks to Wheelabrator Group, it has seen a 66 per cent reduction in the time taken to remove oxides from tooling parts, at its factory in Eckersall Road, Kings Norton.

GKN Aerospace purchased a Vacu-Blast Ventus 125PR air blast cabinet from the market leading surface preparation and finishing specialists, to clean black residue left by the coatings process, from aluminium parts housed inside its vacuum chambers.

Graham Workman, aircraft focus factory manager at GKN Aerospace, said: "Prior to installing the Wheelabrator machine, we used our wet blast cabinet to clean the tooling, but this was causing problems. This machine was used to perform surface preparation work on our products, but cleaning the dirty aluminium as well led to oxide residue contaminating the abrasive media.

"By purchasing a machine specifically to remove the oxide, we've not only freed up the wet blast cabinet to be used for its original intended purpose, we've seen the dramatic reduction in the time taken to clean the parts."

Applied to the surface of windows for aircraft and locomotives in a sealed vacuum chamber, the coating acts as a de-icer, helping to keep the material clear at high altitudes and speeds. GKN Aerospace uses six machines, which together coat about 700 parts each week.

Mr Workman said: "As our glass products are processed, the tooling inside the chamber inevitably picks up some of the coating and we replace it with duplicate parts after every production run of each type of part. The efficiency of the new Ventus machine means the tooling is ready to be refitted when it's time for the duplicate parts to be cleaned, giving us a streamlined operation with no machine downtime."

GKN Aerospace needed a compact machine, which could fit into its current factory, near to the vacuum chambers, as it had previously transported the parts for cleaning to another floor.

Mr Workman said: "The Wheelabrator machine has enabled us to lower costs by recycling the media, as dry blasting allows the used abrasive to be separated from the oxide particles. It also means the parts are ready for use when they come out and we don't have to rinse off any abrasive.

"The nozzle design, in particular, is also preferred by our operators as we can clean the varied and complex areas of the tooling easily."

GKN Aerospace uses high tech transparency design processes to manufacture cockpit and cabin windows for a broad range of commercial and military aircraft.

At Kings Norton, where it employs more than 250 people, it also supplies products to the automotive and locomotive windscreen markets, and sells a range of bullet resistant windows.

Wheelabrator Group owns, designs, manufactures and provides wheelblast, airblast and vibratory mass finishing equipment for surface preparation and cleaning, and serves a variety of sectors, including the aerospace and automotive industries.

Press release issued by Wheelabrator Group, Ltd. on September 26, 2007


 Contact details from our directory:
Wheelabrator Group, Ltd. Shot Peening, Abrasive Materials, Blast Finishing Equipment, Blast Finishing Media, Blast Finishing Services, Metal Finishing/Polishing, Nonabrasive Finishing, Polishing & Buffing, Surface Cleaning
GKN Aerospace Transparency Systems Inc. Ablative Materials, Aircraft Structural Components, Composite Structures, Transparent Canopies, Windshields, Windows


 Related directory sectors:
Surface Treatment

Enhanced listings:

Ascent Aerospace
Ascent Aerospace is the leading provider of aerospace tooling systems, assembly automation and factory integration.

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

MW Industries, Inc
Design and manufacture springs, fasteners and related products for aerospace including: engine components, flight controls, propulsion, landing gear, interiors, avionics, and space exploration vehicles.

Dexmet Corporation
Dexmet MicroGrid® an innovative product line that help improve the composite aircraft withstand the rigors of a lightning strike

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.