Log in to use our free company, program and sector update tracker feature.

Front page

U.S. FAA grants 330-minute ETOPS approval to GEnx-1B PIP engine

The U.S. Federal Aviation Administration (FAA) has granted 330-minute extended-range, twin-engine operations (ETOPS) Approval to 14 CFR Part 33.201 for the GEnx-1B Performance Improvement Program (PIP) engine, which will power the Boeing 787 Dreamliner aircraft. This follows the 330-minute ETOPS approval that was granted to the GEnx-1B baseline engine late last year. The FAA approval confirms the engine has demonstrated the required reliability to conduct ETOPS operations up to 330 minutes flying time from a primary or alternate airport. ETOPS approval provides airlines much greater route-scheduling flexibility as it allows twin-engine aircraft to service routes traditionally reserved for three- and four-engine aircraft.

Boeing recently completed all flight tests of the GEnx-powered Boeing 787 Dreamliner aircraft expected to be required for FAA type certification. The engine performed extremely well in flight-testing. The GEnx-1B baseline and PIP engine have already received FAA engine certification.

Based on proven GE90 architecture, the GEnx engine succeeds GE's CF6 engine. Compared to the CF6 engine, the GEnx will offer up to 15 percent improved fuel efficiency, which translates to 15 percent less CO2. The GEnx's innovative twin-annular pre-swirl (TAPS) combustor will dramatically reduce NOx gases as much as 55 percent below today's regulatory limits and other regulated gases as much as 90 percent. Based on the ratio of decibels to pounds of thrust, the GEnx will be the quietest engine GE has produced due to the large, more efficient fan blades that operate at slower tip speed, resulting in about 30 percent lower noise levels. The GEnx will be the world's only jet engine with both a front fan case and fan blades made of carbon fiber composites.

Press release issued by GE Aircraft Engines on March 9, 2012


 Contact details from our directory:
GE Aircraft Engines Turboprop Engines, Turboshaft Engines, Turbofan Engines, Turbojet Engines


 Related aircraft programs:
Boeing 787 Dreamliner


 Related directory sectors:

Enhanced listings:

Valence Surface Technologies
The leading metal processing company serving the global aerospace industry. Valence’s ten facilities offer full-service capabilities: NDT, shot peen, chemical processing, paint, and other coatings.

Quintus Technologies
Quintus Technologies is a global leading provider of high pressure fluid cell presses and hydroform deep-draw presses for sheet metal forming

Beckwood Press
Your single source for aerospace forming equipment. Manufacturer of Triform Sheet hydroforming presses.

USA Borescopes
USA Borescopes is a global supplier of world class visual inspection equipment. We are the one stop source for aviation professionals.

The leading provider of heat treatment services worldwide. Bodycote offers high quality, reliable and cost-effective services to manufacturers whatever their size or market sector.

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Copyright of Airframer Limited, operated under licence by Stansted News Limited 2016. Terms & Conditions of reading.