Log in to use our free company, program and sector update tracker feature.

Front page

Sonex Aircraft accepts kit reservation deposits for SubSonex personal jet; deliveries anticipated mid-year 2014

Sonex Aircraft, LLC announced today that Kit Reservation Deposits are now being accepted for the SubSonex Personal Jet. A $10,000 refundable deposit will allow SubSonex customers to receive position numbers for the first kit deliveries, anticipated to commence mid-year, 2014. Sonex also announced that an introductory price of $125,000 will be guaranteed for the first ten Kit Reservation Deposit holders, which includes the SubSonex Ultra-Quick Build Kit and the PBS TJ-100 turbojet engine with installation accessories. The announcement came at a briefing for prospective SubSonex customers and members of the media as part of the company's 10th annual Sonex Aircraft Open House and Homecoming Fly-In, an event held at Sonex factory headquarters on Wittman Regional Airport in Oshkosh, that kicks-off the week's events at EAA AirVenture Oshkosh 2013.

"The SubSonex extends the Sonex Aircraft 'Reality Check' philosophy to become the first truly practical and affordable personal jet for recreational flying," remarks Sonex Aircraft Founder & President, and SubSonex designer John Monnett. "The first benchmark on the SubSonex 'reality checklist' is the fact that the aircraft is becoming a reality for our customers in the very near-term as an Ultra-Quick Build Kit, complete with engine, that leaves only the most minor items for the customer to source, and the most basic of construction tasks to complete. This will be a fully-realized kit jet product from the very first delivery."

The SubSonex Ultra-Quick Build Kit is intended for flight under Experimental Exhibition category rules. Without the "51 percent rule" restrictions associated with Experimental/Amateur-Built airworthiness certification, the SubSonex will ship with a pre-assembled fuselage, wings, tail and control surfaces with canopy and windshield installed. The SubSonex customer will install the easily removable outboard wing panels, engine and fuel system, bolt-in the retractable landing gear, install avionics, electrical systems and controls, install the supplied BRS full-aircraft recovery parachute system, pre-molded fiberglass components and upholstery, and add paint. Under Experimental Exhibition category regulations, SubSonex customers will also have the freedom to take advantage of builder assist centers or aircraft finishing services to do the work for them.

"Experimental airworthiness certification under the Exhibition category is perfectly-suited to the mission of an aircraft like the SubSonex," continued Monnett. "There is no 'proficiency flight area' required for aircraft in this group of the exhibition rules, and this is an aircraft that you'll certainly want to show-off at organized events. You can either fly the aircraft cross-country to an event, or utilize the SubSonex's easily removable outboard wing panels to transport the aircraft in a compact trailer. Pilots used to flying warbirds, competition aerobatic planes, sailplanes or other specialized aircraft are well-versed when it comes to working within the operational restrictions for exhibition aircraft, and the kit construction freedoms afforded to aircraft in this category is a perfect fit for the desires of the likely SubSonex Personal Jet customer." Working commercial pilots operating jet or turboprop aircraft can easily qualify for the FAA Letter of Authorization (LOA) required to fly the Subsonex, and small aircraft currency can be provided, if needed, via Sonex Aircraft's T-Flight Transition Training Program. Pilots without previous jet experience can also qualify after obtaining the appropriate training, and all prospective SubSonex customers are invited to contact Sonex Aircraft representatives to discuss their flight qualifications.

The SubSonex Personal Jet concept was first unveiled at EAA AirVenture Oshkosh 2009. After successful pairing with the PBS TJ-100 engine, the SubSonex JSX-1 prototype achieved first flight in August 2011 and completed a successful flight test program in 2012. Second-generation JSX-2 prototypes are currently under construction to serve as "conforming" prototypes representing the final SubSonex Personal Jet product. Designed to be an affordable yet feature-packed, easy to fly kit jet aircraft, JSX-2 will incorporate many new features and enhancements over the original proof of concept prototype. Included in the JSX-2 model's list of enhanced features are improved aesthetic lines, larger cockpit, instrument panel and fuel capacity, fully-retractable landing gear system with steerable nosewheel, dual truck main gear with integrated hydraulic brakes, optional cabin heat, and more. The SubSonex kit will also include a BRS Aerospace full-aircraft recovery ballistic parachute system. The BRS system will greatly improve the aircraft's safety, while increasing available cockpit space and comfort by eliminating the need for a pilot-wearable parachute.

The TJ-100 turbojet engine is produced by PBS Velká Bíteš of the Czech Republic, a large manufacturer of rotary machines with roots dating-back to 1814. The TJ-100 is designed for UAV, UCAV, experimental aircraft and motorized gliders with hundreds of units delivered since its introduction in 2008. The engine is a true "plug & play" package featuring integral ECU, starter/generator and oil system, and ships complete in the SubSonex kit with instrumentation, throttle control, pre-wired harnesses and other installation components. The 247 lb thrust engine continues to exceed the expectations of PBS designers and customers alike, with flawless performance and an outstanding service history, all backed by top-notch customer service. The TJ-100 can fit in a small crate to be economically shipped for service, and PBS can turn-around inspection and overhaul service orders in a single week.

Attendees of today's briefing received a new full-color brochure describing the SubSonex Kit Reservation Deposit program, features and estimated specifications of the aircraft, and including a SubSonex Kit Reservation Deposit Agreement form. This packet of information will be available to prospective SubSonex customers throughout the week of AirVenture at the Sonex exhibit booth, along with copies of the SubSonex DVD video "Flying the SubSonex JSX-1." More information and videos can be found online, along with the new SubSonex brochure, deposit agreement, and a mechanism for placing SubSonex Kit Reservation Deposits via the Sonex Web Store: http://www.SonexAircraft.com/subsonex

The in-progress JSX-2 prototypes were on-display at today's customer and press briefing, along with the original JSX-1 proof-of-concept prototype, and a JSX-2 cockpit mockup for prospective customers to try-on. The JSX-1 prototype and the JSX-2 cockpit mockup will be on-display at Sonex Aircraft's AirVenture exhibit space in the North Aircraft Display Area, booth number 622, throughout the week of AirVenture. The in-progress JSX-2 prototypes will be on-display in Sonex Aircraft's Hornets' Nest Research and Development Center, available for viewing during factory tours being held each morning of the show. The JSX-1 prototype will once again be featured in flight demonstrations during the showcase presentation at AirVenture. Tentatively scheduled for Tuesday and Thursday during the afternoon air show, the SubSonex will be flown by lead test pilot and Super Salto Jet Sailplane air show performer Bob Carlton. Bob Carlton and John Monnett will also be appearing with the SubSonex to speak about the aircraft and its flying qualities on AirVenture's Phillips 66 Plaza main stage from Noon to 1pm on Thursday, August 1st.

Press release issued by Sonex Aircraft, LLC on July 28, 2013


 Contact details from our directory:
Sonex Aircraft, LLC Airframer
PBS Velka Bites, a.s. Auxiliary Power Units, Mechanical Transmissions, Air Conditioning Equipment, Turbojet Engines, Turboprop Engines, Turboshaft Engines, Engine Parts, Gearboxes, Air Start Systems
BRS Aerospace Whole Aircraft Parachutes


 Related aircraft programs:
Sonex SubSonex


 Related directory sectors:
Safety & Security Systems

Enhanced listings:

Victrex Plc
New VICTREX® AE250 composites and hybrid molding technology are changing the equation in Aerospace composites – find out more!

TenCate Advanced Composites
TenCate Advanced Composites is a leading provider of thermoset and thermoplastic prepregs to the aerospace industry.

Redcliffe Precision Ltd
Aerospace Multi Axis CNC Precision Manufacturers & Thread Rolling Specialists.

Titanium Industries Inc.
Specialty metals solutions, supplying performance metals for critical aerospace applications

USA Borescopes
USA Borescopes is a global supplier of world class visual inspection equipment. We are the one stop source for aviation professionals.

See our advertising tariff.


data pages remaining in monthly quota for non-subscribers

© Airframer Limited, operated under licence by Stansted News Limited 2018. Terms & Conditions of reading. Privacy policy