Log in to use our free company, program and sector update tracker feature.

Front page

Piaggio Aerospace’s Avanti EVO receives new certification.

Piaggio Aerospace's Avanti EVO receives EASA and FAA certification for landing gear system

Piaggio Aerospace announces a further step forward to consolidate the performances of the Avanti EVO. The Italian aircraft manufacturer obtained both the EASA and the FAA certifications for the new Landing Gear System that completes the significant improvements of the aircraft. 

The new certification concerns the installation of the new Main Landing Gear System, the new Nose Landing Gear System and the Nose Wheel Steering System (NWSS), parts of the new Magnaghi landing gear that improves performance, reliability and cuts maintenance costs. The official approval arrives after an intense test program. The new landing gear is now ready to be installed as a standard on all the Avanti EVO that are going to be delivered from now on.

Third generation of P.180 Avanti, the Avanti EVO increases its performance, efficiency and comfort. Able to fly at a maximum cruise speed of 402 Kts, (745 km/h) with a range IFR of 1,770 nm (3,278 km), a climbing rate of 2,770 fpm (844 m/per minute) and can fly up to a service ceiling of 41,000 feet (12,500 m). As regards the Avanti EVO fuel consumption, it is 40% lower than that of jet planes of the same class and makes Avanti EVO one of the most environmentally friendly aircraft in its market segment, with a low level of emissions. A low noise power plant, where the turbines are fitted with counter-rotating 5-blades scimitar propellers, permits a 68% reduction of the community noise making the Avanti EVO a better neighbour.

Press release issued by Piaggio Aerospace on October 12, 2015


 Contact details from our directory:
Piaggio Aerospace Airframer


 Related aircraft programs:
Piaggio P.180 Avanti

Enhanced listings:

AC Products, Inc.
Full line of peelable maskants for chemical milling, etching, anodizing, acid stripping, plating and more.

Peli Hardigg UK
Peli-Hardigg is the world’s largest manufacturer of aerospace approved reusable plastic shipping and storage containers, built to last a lifetime.

Dymax Corporation
A leading manufacturer of advanced light-curable adhesives, maskants, coatings, oligomers, light-curing equipment, and fluid dispense systems.

Indestructible Paint Ltd
A developer and manufacturer of specialist, technology coatings to support the lifetime of aviation, defence and general industry.

Fine Tubes
Manufacturer of precision tubes in high strength titanium, stainless steel and nickel alloys, seamless, welded or welded & redrawn

See our advertising tariff.


Monthly page limit exceeded. Please buy a subscription.

© Airframer Limited, operated under licence by Stansted News Limited 2018. Terms & Conditions of reading. Privacy policy