Every Bulletin story and press release covering Flying Whale LCA60T, newest first.
14 items
An agreement will allow Flying Whales to begin studies and preparations for the construction of its LCA60T production facility in Quebec.
The LCA60T airship will use 32 D250 motors for efficient, sustainable heavy-lift cargo transport with reduced emissions.
The frame of this airship, one of the largest ever developed, must distribute the structure’s entire load. Flying Whales is to develop thin wall carbon fibre tubes that meet all technical requirements and specs.
Aboard the LCA60T, the generator will create a hybrid propulsion system by being integrated with a gearbox and a turbine that uses jet fuel and sustainable aviation fuel (SAF).
In order to provide the 4 MW of electrical power required for operations, the airship will incorporate a total of four 1 MW turbogenerators in the nacelles located in the side fins of the aircraft.
The LCA60T airship will have its avionics suite and flight control computer supplied by Thales. It is designed to carry up to 60 tonnes of cargo and to load and offload in stationary flight to serve hard to reach locations.