Airframer
Track the aircraft, companies and sectors you follow — log in to start, or see how it works ›
The Airframer Bulletin › Archive

News archive: Test Services

Every Bulletin story and press release covering Test Services, newest first.

Whole archive

600 items · page 4 of 12

31 March 2022

ReleaseInceptra acquires NobleTek

24 March 2022

ReleaseHydrogenOne Capital Growth plc and Safran announce a joint investment in UK passenger flight innovator Cranfield Aerospace

21 March 2022

ReleaseTsAGI takes part in the development of the engine nacelle of the promising PD-8 engine

3 March 2022

Tech Mahindra brings experience to flying car project

Tech Mahindra will support ASKA in the areas of design, analysis, development of composites and advanced materials, crash dynamics (automotive and aerospace), battery and structural testing.

11 February 2022

ReleaseNASA's X-59 calls on Texas for key testing

8 February 2022

ReleaseAVL contribution to DLR project: 1.5 megawatt composite testbed for fuel cells

4 February 2022

ReleaseDMD Solutions announces its collaboration with the German aircraft Original Equipment Manufacturer (OEM) Deutsche Aircraft

3 February 2022

ReleaseEmployment and investment initiative: FACC creates more than 200 new jobs and invests EUR 150 million

2 February 2022

ReleaseNIAR and Victrex begin NCAMP qualification of automated fibre placed VICTREX AE 250 thermoplastic material system

26 January 2022

ReleasePartnering with Rolls-Royce and Electroflight to create the battery for world's fastest all-electric aircraft

19 January 2022 The small scale spin testing facilities at Element Warwick will initially support Rolls-Royce programs.

Element partners Roll-Royce for UK spin testing

The Element team at Warwick will help Rolls-Royce conduct a comprehensive evaluation of its next generation disc alloy in shorter timescales, more conveniently than possible with its existing Berlin facility.

11 January 2022

ReleaseState grant supports ZeroAvia project at Paine Field

10 January 2022

ReleaseThe Emitech Group is expanding its activities in the field of electric mobility with test facilities dedicated to hydrogen fuel cells and equipments

6 January 2022 NASA’s X-59 Quiet SuperSonic Technology aircraft (QueSST) is pictured here at Lockheed Martin Skunk Works in California, wrapped up in preparation for its move to Texas.

Quiet supersonic demonstrator starts ground testing in Texas

While in Texas, ground testing of the X-59 will ensure the aircraft can withstand the loads and stresses that typically occur during flight. The team will also calibrate and test the fuel systems.

6 January 2022

ReleaseThe L-39NG passed a five life cycles fatigue test

20 December 2021

ReleaseCosta Rica company to provide software development and verification services to Joby Aviation

16 December 2021

ReleasePragmaDev partners in a major digital integration project in the aeronautic sector

16 December 2021

ReleaseDanish test expert R&D Test Systems develops bearing test rig for Rolls-Royce UltraFan aero-engine demonstrator project

11 December 2021

ReleaseTurboprop training aircraft P01- successful first flight

25 November 2021 A view of the X-59 being supported by ground supports in preparation for installation of the landing gear and other hardware required for structural testing.

Supersonic X-59 enters final assembly phase

Removed from its jig, the X-59 is ready for final assembly including the first power-on of the aircraft to test its internal systems. The first flight is planned for 2022.

24 November 2021

ReleaseBuehler presents webinar: Magnesium and its alloys - metallographic techniques for quality control on December 1, 2021

17 November 2021

ReleaseAvionyx lands electric air taxi contract, set for hiring boom

16 November 2021

ReleaseFMi Chemical becomes approved supplier to General Electric

10 November 2021 The contract highlights the continued commitment by Spirit to Irish suppliers following its recent acquisition of Bombardier's Belfast operations.

EireComposites and Spirit sign aerospace contract

Spirit AeroSystems and EireComposites' contract will enable the creation of 40 jobs over the next three years, while also securing 60 existing positions.

8 November 2021

ReleaseTsAGI examines a "flying wing" with an overhead engine

6 October 2021

ReleaseFuel cells for air transport – ground-breaking ceremony for the BALIS test field in Empfingen

15 September 2021

ReleaseNASA and Joby complete flight tests

9 September 2021

ReleaseSkydweller Aero Inc. raises $40m in oversubscribed Series A funding round to continue rapid technological development to meet demand for persistent flight

9 September 2021

ReleaseDaher announces three new innovation centers to accelerate recovery

8 September 2021

ReleaseNASA completes tests of X-59 eXternal Vision System

23 August 2021

ReleaseLeading global investors buy minority stake in QuEST Global

18 August 2021

ReleaseSwift Tactical Systems expands the capabilities of its Swift021 VTOL UAS product for long-range and high-altitude performance with Silvus radios at the SLVUAS test site in Colorado

18 August 2021

ReleaseLDRA's latest integration with DDC-I accelerates compliance for multicore aerospace systems

12 August 2021 The all-electric X-57 has successfully completed high-voltage ground testing.

All-electric Maxwell powers past a testing milestone

One NASA goal is to establish the X-57 as a reference platform for integrated approaches of distributed electric propulsion technologies. Next up, the X-57 will undergo verification and validation testing.

27 July 2021

ReleaseAtrenne Computing Solutions joins the Open Group SOSA Consortium

23 July 2021

ReleasePACE design and analysis software to support UK's FlyZero zero-carbon emission aircraft initiative

13 July 2021

ReleaseJJ Churchill partners with Tinicum and Blauvelt Capital to deliver its next phase of growth

8 July 2021

ReleaseNASA's National Campaign adds partners

1 July 2021

Collins completes design stage for electric airship motor

Collins is designing and testing the motor at its Electronic Controls and Motor Systems Center of Excellence in Solihull, where it invested $18 million to expand and add power electronics and motor development capabilities.

23 June 2021 The facility will carry out wind tunnel tests for the Turkish Fighter.

Turkey makes progress toward wind tunnel capability

The first role for the new facility will be to carry out wind tunnel tests on the TF-X Turkish Fighter, but is intended to be used in the development of a variety of indigenous, rotary-wing and fixed-wing aircraft.

15 June 2021

ReleaseIntroducing Axiometrix Solutions

11 June 2021

ReleaseBuehler presents webinar: Etching & microstructures of titanium alloys; setting the metallographic foundation for material analysis on June 30, 2021

9 June 2021 The facility includes labs, collaborative office space, and reconfigurable testing areas.

Filton research and test centre opens for business

The facility includes labs, collaborative office space, and reconfigurable testing areas - a combination of test assets reckoned to be unique in Europe. It will be central to the Airbus Wing of Tomorrow programme.

9 June 2021 The EcoPulse demonstrator aircraft successfully passed its design review last year.

EcoPulse demonstrator graduates from the wind tunnel

Distributed Propulsion Systems consist of breaking down thrust generation into many small engines spread out along the span of the wing. Wind tunnel work will now reveal its final energy performance.

8 June 2021

ReleaseAngeles Equity Partners acquires Primus Aerospace

7 June 2021

ReleaseElement Antwerp achieves Nadcap accreditation for chemical analysis

27 May 2021

ReleaseApplus+ acquires IMA Dresden, a leading testing laboratory in Europe

19 May 2021

ReleaseNASA tests system for aircraft positioning in supersonic flight

13 May 2021

ReleaseAerospace firms End State Solutions and Near Space Corp. announce joint agreement

10 May 2021

ReleasePowerful enhancements in Volume Graphics' industrial CT software version 3.5 help detect and correct design flaws and manufacturability issues